HP 900 - To Disable the Touch Pad or Pointing Stick

Operating the OmniBook
Using the OmniBook Pointing Devices
28 Reference Guide
To disable the touch pad or pointing stick
You can disable the touch pad or pointing stick if it interferes with your normal operation
of the computer.
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Select the System Devices menu.
4. Highlight Internal Pointing Devices and select only the pointing device you want to
use. Choose Both if you want both devices available.
5. Press F10 to save and exit.