Expanding the OmniBook
Using Docking Products
Reference Guide 77
To dock the OmniBook
1. From the Start menu, shut down the OmniBook.
If you have a plug-and-play operating system, such as Windows 95, Windows 98, or
Windows 2000, you do not need to turn off the OmniBook before inserting into the
dock.
2. Connect power to the dock—the type of connection depends on the dock. See the
manual that came with the dock.
3. Place the OmniBook on the dock platform, with the rear of the computer facing the
dock’s docking connector. Make sure the OmniBook’s lower PC Card eject button is
in.
To Next Page
Loading...
