Configuring the OmniBook
Configuring Security Options
Reference Guide 95
To attach a security cable
Your OmniBook has two built-in connectors that allows you to secure the OmniBook
with a cable. The Kensington MicroSaver lock system works with this connector and is
available at many computer stores.
1. Wrap the cable around a stationary object, such as a table leg.
2. Loop the cable to create a slip knot around the stationary object—make sure it can’t
slip off
3. Insert the lock into one of the OmniBook security connectors and release the key.
Store the key in a safe place away from the OmniBook.
To set PC identification
Windows 2000
You cannot set PC identification under Windows 2000 because TopTools is not
available at this time.
You must have administrator password authority to set a PC identification number.
1. If you have not already installed HP TopTools, do so now (see “To install TopTools”
on page 92).
2. Click Start, Programs, HP TopTools for Notebooks, HP TopTools.
3. Click Security.
To Next Page
Loading...
