HP 9000 - Load Paper into Trays 2 and 3; Instructions for Loading Paper into Trays 2 and 3

14 Printer Setup ENWW
Step 7 Load Trays 2 and 3
This section describes how to load A4-
or letter-size paper. For instructions on
loading and configuring other sizes and
types of media, see the HP LaserJet
9000 Introduce manual (user guide) that
came on the CD-ROM.
CAUTION
To avoid a paper jam, never open a tray
while the printer is printing from that tray.
To load Tray 2 and Tray 3
1 Pull the tray open until it stops.
2 Load a stack of Letter- or A4-size
paper with the top of the stack
toward the rear of the tray. For
single-sided printing, the side to be
printed should be down. For double-
sided printing, the first side to be
printed should be up.
3 Adjust the left (Y) paper guide by
pressing the tab on the guide and
sliding it to the mark for A4- or letter-
size paper.
1
2
3