3. Locate the white, vinyl calibration strips.
4. Clean the ADF backing and the calibration strips by wiping them with a clean, damp, lint-free cloth.
Use an ammonia-based surface cleaner to dampen the cloth.
5. Close the top of the digital sender.
Clean the ADF rollers
You should clean the rollers in the ADF if you are experiencing misfeeds or if your originals show marks
as they exit the ADF.
CAUTION: Cleaning the rollers too frequently could introduce dust into the device.
1. Open the scanner lid.
ENWW Clean the device 61
To Next Page
Loading...
