2. Locate the rollers near the vinyl calibration strips.
3. Wipe the rollers gently with a clean, water-dampened, lint-free cloth.
CAUTION: Do not pour water directly onto the rollers. Doing so might damage the device.
4. Close the scanner lid.
5. Push the release button to open the ADF cover.
6. Locate the rollers.
7. Wipe the rollers with a clean, water-dampened, lint-free cloth.
CAUTION: Do not pour water directly onto the rollers. Doing so might damage the device.
62 Chapter 5 Manage and maintain the device ENWW
To Next Page
Loading...
