8. Remove one screw (callout 4).
Figure 5-36 Removing the control-panel cover assembly (5 of 6)
9. Remove the scanner rear cover by firmly pulling the cover toward you.
10. Remove one screw (callout 5) to release the metal wire clip, open two cable guides (callout 6), and
then disconnect one cable (callout 7) to release the control-panel cover assembly from the device.
5
6
7
Figure 5-37 Removing the control-panel cover assembly (6 of 6)
62 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...
