53
A
Setup Instructions
Using a USB Connection
You can connect your HP DeskJet 900 Series directly to your computer using a
USB cable if your computer supports USB (Universal Serial Bus). Before you
connect your printer to your computer, make sure your configuration meets these
requirements:
•
Your computer must support USB
•
You will need a USB-compliant interface cable, such as HP Part Number C6518A
•
Your computer must be turned on and running MacOS 8.1 or higher
1 Attach Automatic Two-Sided Printing Module
a Turn knob on printer’s Rear Access Door
counter-clockwise and remove door.
b Insert module into back of printer.
2 Plug in Electrical Power Cord
To Next Page
Loading...