Introduction
1–11
3. Shut down the system.
If you are running HP-UX under HP VUE, shut down your system by performing
the shutdown procedure described in the system Owner’s Guide which came with
your workstation.
If you are running HP-UX without HP VUE, shut down your system by typing the
following command:
# /etc/shutdown –h
RETURN
You must have superuser privileges to use the /etc/shutdown command. If you do
not have superuser privileges, contact your system administrator.
If your workstation is part of a cluster, refer to the Managing Clusters of HP 9000
Computers manual for instructions on shutting down.
To Next Page
Loading...
Need help?
General