Need help?Do you have a question about the HP HPE Alletra 6010 and is the answer not in the manual?
Preparation for installing storage array and determining network topology, IP addresses, and subnets.
Choosing network topology for optimal networking choices like one shared, two dedicated, advanced, or dual fabric.
An IP address is a 32-bit identifier for devices on a TCP/IP network.
Firewall rules required for the storage SAN to communicate with storage servers on specific ports.
A subnet is a logical subdivision of a network, defined by IP address and netmask.
Interface pairs ensure high availability and redundancy in case of controller or network switch failure.
Completing initial setup from a Windows host using the HPE Storage Toolkit.
Completing initial setup using the Command Line Interface (CLI).
Steps to enable the array for cloud management, including subscriptions and accounts.
Procedure to add and assign the storage array to Data Services Cloud Console for management.
Description of the array's front panel components and layout.
Description of the array's rear panel components and cabling.
Front LEDs status and descriptions for array components.
Procedures for maintaining drives, including handling failed drives.
Procedures for replacing components on a controller.
Procedure to replace existing NICs, HBAs, or SCM cards on the storage array.
Procedure to replace a failed SFP transceiver on the HPE storage array.
Procedure to replace a fan in the HPE storage array or expansion shelf.
Procedure to replace the USB boot device in the HPE storage array.
Procedure to add SSDs to increase capacity on the HPE storage array or expansion shelves.
Procedure to upgrade NICs, HBAs, or SCM cards in the HPE storage array.
Procedure to upgrade the controllers in the HPE storage array.
Generic and model-specific hardware specifications for HPE storage arrays.
Supported SFP+, SFP28, and QSFP28 optical transceivers.
How to check storage array and expansion shelf temperatures to prevent overheating.
Description of regulatory warnings applicable to HPE storage arrays.
Description of safety warnings applicable to HPE storage arrays.
Basic electrical safety precautions for protecting users and equipment.
To Next Page
General