HP HPE Alletra 6010

61 Slot 6Slot 1
2 7Slot 2 Serial port
83 OCP expansion slotSlot 3
4 9Slot 4 Eth0 ports, onboard
5 Slot 5
Array rear view - HPE Alletra 6010
In this example, quad fc ports are installed in Slot 1 and quad eth ports are installed in Slot 2 and Slot 3.
41 Serial portSlot 1
2 5Slot 2 OCP expansion slot
63 Eth0 ports, onboardSlot 3
Shut Down the Array Using the GUI
This action shuts down the array and any expansion shelves managed by the array.
For most hardware changes you do not need to shut down (power off) the array because the components are redundant and
hot swappable.
CAUTION: When you shut down the array, all volumes go offline.
Procedure
1. In the main menu, choose Administration > Shutdown.
2. Click Shut Down Array.
Array Components 48
Documentation Feedback: doc-feedback-hpe-storage@hpe.com