Figure 9: Array interface examples (Ethernet and Fibre Channel Ports)
61 Slot 6Slot 1
2 7Slot 2 Serial port
83 OCP expansion slotSlot 3
4 9Slot 4 Eth0 ports, onboard
5 Slot 5
41 Serial portSlot 1
2 5Slot 2 OCP expansion slot
63 Eth0 ports, onboardSlot 3
For more information on SFPs and connecting 10GbE ports to your array, see SFP Specifications on page 124.
Installation Checklist
Note: During the intial setup process, you will be prompted for the following information. HPE strongly recommends
that you gather this information prior to starting the setup process.
All network settings represent IPv4 values.
The latest version of this list can be found at http://infosight.hpe.com/welcomecenter.
ValueDescriptionItem
Domain
Install the HPE Storage Array 18
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
To Next Page
Loading...
