ValueDescriptionItem
IP address of the DNS server responsible for the do-
main. At least one server is required. Up to three
servers are supported.
All configured DNS servers should be reachable, able
to resolve the same records, and able to resolve HPE
addresses (for example: device.cloud.hpe.com).
Network connectivity is required from the Data Orches-
trator to Data Services Cloud Console. Network time
protocol servers (NTP) must be configured on the
Data Orchestrator and must be allowed to be in sync
with global time services. DNS name resolution must
be configured on the Data Orchestrator and be allowed
to resolve global Internet names and domains. The
Data Orchestrator will periodically transmit health and
statistical telemetry over HTTPS/TLS.”
DNS server
Name of the domain the array will be joining.Domain name
Time
IP address of the NTP server.Time (NTP) server
Geographical region where the array is located.Region
Time zone in which the array is located.Time zone
Attributes
HTTP Proxy server
HTTP Proxy Server Port
Proxy Server Username
Proxy Server Password
The person that HPE should contact if the array needs
attention.
Support contact
Indicate whether to claim the array in HPE InfoSight
for predictive support.
HPE InfoSight
System
The name that you want to assign.System Name
The geographical location where the array is installed
(required for setup).
System Country Location
System IP
IPv4: IP address
IPv4: Subnet Mask
IPv4: Gateway IP address
IMPORTANT: All network components must be
reachable by the array.
The administrator name (user account) and password
that you want to create.
System Credentials
Install the HPE Storage Array 19
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
To Next Page
Loading...
