HP HPE Alletra 6010

Figure 17: An example of network connections for dual fabric Fibre Channel
91 Management port eth0a on controller AHost/server
2 10Fibre Channel HBA Management port eth0a on controller B
113 Host data connectionsFibre Channel switch 1
4 12Fibre Channel switch 2 Host management connections
135 Data fabric 1 connectionsEthernet switch
6 14Fibre Channel array Data fabric 2 connections
157 Management port connectionsInterface pair from data ports fc3a
8 Interface pair from data ports fc3b
Connect the Power to the Array
Before you begin
The storage array must be installed in a rack or enclosure and the array must be connected to a network.
Install the HPE Storage Array 32
Documentation Feedback: doc-feedback-hpe-storage@hpe.com