To Next Page

To Previous Page

3–4

A screen similar to the following appears:

H/W Path Description Status

====================================

1.0.0 graphics ok(0x577)

2.0.1 scsi ok(0x7071)

2.0.1.2.0 disk ok(0x202)

2.0.2 lan ok(0x7072)

2.0.3 hil ok(0x7073)

2.0.4 serial ok(0x7075)

2.0.5 serial ok(0x7075)

2.0.6 parallel ok(0x7074)

2.0.7 scsi ok(0x707c)

2.0.7.6.0 disk ok(0x101)

Look under the H/W Path heading for device paths beginning with the sequence 2.0.1. The

sequence

2.0.1 denotes single-ended scsi controller. The number following 2.0.1 is the

address setting for a single-ended device on that controller. For example, the listing

2.0.1.2.0 in the sample device list tells us that there is a single-ended device currently using

address 2.

HP A165890669 User Guide

Other manuals for HP A165890669