76 Chapter 5
Troubleshooting Your Application
Using ROSE API Tracing
AP_TRACE_FILE:
The name of the file that is to receive tracing results.
Default = stderr.
AP_TRACE_MAX_UDATA:
The maximum amount of user data (in bytes) that will be displayed
when parameters are displayed.
Default = 16.
Tracing Using Global Variables
ROSE API tracing is controlled by three global variables. The variables
are described below:
Table 5-1 ROSE Trace Variables
Selecting Types of Tracing
The level of ROSE tracing is controlled by the rose_trace variable.
The rose_trace variable is defined as a bitmask that can be set to
particular values (as defined in the file /opt/ots/lib/api_trace.h) and as
listed in Table 5-1.
For example, if you want to trace output parameters only, you would set
rose_trace to API_TR_OUTPUT.
rose_trace An integer value which constitutes a
bitmask to control the level of tracing
performed. By default this mask is 0
rose_trace_fp A pointer to a UNIX file to receive the
tracing output. By default this is set to
stderr.
rose_trace_max_udata The maximum amount of user data (in
bytes) that will be displayed during tracing.
The default is 16.
To Next Page
Loading...
Need help?
General