94
d ..............................................................................
..............................................................................
..............................................................................
e ..............................................................................
..............................................................................
..............................................................................
f ..............................................................................
..............................................................................
..............................................................................
0 1 2 3 4 5 6 7 8 9 A B C D E F
Running test 10, Initialize RAMBUS ... on 8 EV7s Diagnostic Tests
Running test 11, Initialize Memory ... on 8 EV7s
Running test 12, Data Pattern March read/write ... on 8 EV7s
Running test 13, RAID channel Test ... on 0 EV7s
Running test 14, Single Bit Error ... on 8 EV7s
Running test 15, Double Bit Error ... on 8 EV7s
Running test 20, Init IO7 and Start Clocks ... on 2 EV7s
Running test 21, IO7 Data Path (Scratch CSR) ... on 2 EV7s
Running test 22, IO Single Bit Error checkers ... on 2 EV7s
Running test 23, IO Double Bit Error checkers ... on 2 EV7s
Running test 24, IO Timer Expirations ... on 2 EV7s
Running test 25, IO up-hose SBE checkers ... on 2 EV7s
Running test 26, IO up-hose DBE checkers ... on 2 EV7s
Running test 30, Configure RBOX Routes ... on 8 EV7s
Running test 31, Clear Errors / Enable Routes ... on 8 EV7s
Running test 32, Route Test: N S E W ... on 8 EV7s (North)
Running test 32, Route Test: N S E W ... on 8 EV7s (South)
Running test 32, Route Test: N S E W ... on 8 EV7s (East )
Running test 32, Route Test: N S E W ... on 8 EV7s (West )
Running test 33, Inverse Route Setup ... on 8 EV7s
Running test 32, Route Test: N S E W ... on 8 EV7s (North)
Running test 32, Route Test: N S E W ... on 8 EV7s (South)
Running test 32, Route Test: N S E W ... on 8 EV7s (East )
Running test 32, Route Test: N S E W ... on 8 EV7s (West )
Running test 33, Inverse Route Setup ... on 8 EV7s
Running test 34, Single Bit Error checker ... on 8 EV7s
Running test 35, Double Bit Error checker ... on 8 EV7s
Running test 31, Clear Errors / Enable Routes ... on 8 EV7s
Running test 16, IP Memory Access ... on 8 EV7s
Running test 40, Local I/O Device Interrupts ... on 8 EV7s
Running test 41, Local Interval Timer Interrupts ... on 8 EV7s
Running test 42, Local Interprocess Interrupts ... on 8 EV7s
Running test 43, Software Alerts ... on 1 EV7s
Running test 46, Other Local Interrupt Bits ... on 8 EV7s
HP:1 SP:0 PRIMARY: ns:0 ew:0 10.0.1.1
Running test 50, Loop on Secondary Routine ... on 7 EV7s
Error code 0: done Console Loads Here
TFTP server: could not send client file "srmfw"
Powered On HP:1 SP:255 Free_Pool_1
Powered On HP:1 SP:0 Default_SP
Connecting to partition. Use the sequence ^[^[MBM to return. Autoconnect
starting console on CPU 0 First SRM Output
initialized idle PCB
To Next Page
Loading...
Need help?
General