HP AlphaServer ES47 Installation Information

95
initializing semaphores
initializing heap
initial heap 500c0
memory low limit = 354000 heap = 500c0, 3ffc0
initializing driver structures
initializing idle process PID
initializing file system
initializing timer data structures
lowering IPL
CPU 0 speed is 800 MHz
create dead_eater
create poll
create timer
create powerup
00000001 exit status for from_init
entering idle loop
access NVRAM
Get Partition DB
hpcount = 1, spcount = 2, ev7_count = 8, io7_count = 2
hard_partition = 1
IO7-100 (Pass 2) at PID 0
Hose 0 - 33 MHz PCI
Hose 1 - 33 MHz PCI
Hose 2 - 133 MHz PCI-X
Hose 3 - 2X AGP
IO7-100 (Pass 2) at PID 1
Hose 4 - 33 MHz PCI
Hose 5 - 33 MHz PCI
Hose 6 - 66 MHz PCI
Hose 7 - 2X AGP
0 sub-partition 0: start:00000000 00000000 size:00000000 40000000
PID 0 console memory base: 0, 1 GB
1 sub-partition 0: start:00000004 00000000 size:00000000 40000000
PID 1 memory: 400000000, 1 GB
2 sub-partition 0: start:00000008 00000000 size:00000000 40000000
PID 2 memory: 800000000, 1 GB
3 sub-partition 0: start:0000000c 00000000 size:00000000 40000000
PID 3 memory: c00000000, 1 GB
4 sub-partition 0: start:00000020 00000000 size:00000000 40000000
PID 4 memory: 2000000000, 1 GB
5 sub-partition 0: start:00000024 00000000 size:00000000 40000000
PID 5 memory: 2400000000, 1 GB
6 sub-partition 0: start:00000028 00000000 size:00000000 40000000
PID 6 memory: 2800000000, 1 GB
7 sub-partition 0: start:0000002c 00000000 size:00000000 40000000
PID 7 memory: 2c00000000, 1 GB
total memory, 8 GB
probe I/O subsystem
probing hose 0, PCI
probing PCI-to-PCI bridge, bus 2
do not use secondary IDE channel on CMD controller
probing PCI-to-PCI bridge, bus 3
bus 2, slot 1 -- dqa -- CMD 649 PCI-IDE
bus 2, slot 2 -- pka -- Adaptec AIC-7892
bus 3, slot 4 -- eia -- DE602-AA
bus 3, slot 5 -- eib -- DE602-AA

HP AlphaServer ES47 Specifications

General

Brand	HP
Model	AlphaServer ES47
Category	Server
Language	English