HP C30 - Fuser Drive Removal

Fuser Drive Removal
7-58 Removal/Replacement Procedures June 1999
Fuser Drive Removal
To remove the fuser drive:
1 Open the back cover.
2 Remove the fuser drive cover (three screws).
3 Remove the main drive cover (one screw).
4 Remove the gear stay cover (one screw).
5 Remove the gear stay (three screws).
6 Remove the fuser drive belt (see page 7-57).
7 Remove the fuser drive (four screws).
Gear Stay
Gear Stay
Main Drive
Fuser Drive
Fuser Drive Detail
Cover
Cover
Cover