HP C30 - Paper Feed Drive Belt Removal

Paper Feed Drive Belt Removal
June 1999 Removal/Replacement Procedures 7-59
Paper Feed Drive Belt Removal
To remove the paper feed drive belt:
1 Open the back cover.
2 Remove the fuser drive cover (three screws).
3 Remove the paper feed drive cover (three screws).
4 Remove the main drive cover (one screw).
5 Remove the cleaner drive belt (see page 7-55).
6 Push down on the idler arm and slide the paper feed drive belt off the gear.
Paper Feed
Drive Cover
Main Drive Cover
Fuser Drive Cover
Idler Arm
Cleaner Drive Belt
Paper Feed Drive Belt Detail