HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks
Installation Instructions
13
NOTE The universal front mounting bracket can be flipped in order to locate the system further
forward in the rack (see inset).
Figure 1-12. Front Mounting Brackets
3. Using three 8-32 KEPS nuts per L-bracket, assemble the appropriate L-brackets* and the 2-post
mounting bracket to the outer rail. (A6945A contains both EIA and ETSI L-brackets.) The 2-post
mounting bracket is installed onto the two front-most studs, overlapping the front L-bracket and sharing
two threaded studs with it.
Figure 1-13. Attaching L-Brackets to Outer Rails
*Note: 23-inch EIA L-brackets
are illustrated.
To Next Page
Loading...
