HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks
Installation Instructions
15
5. Slide the system into the rack making sure the inner rails are captured by the outer rails. Support the
weight of the system until lock features on the inner rails engage with the slot features on the outer
rails. An audible “click” will be heard.
Figure 1-15. Engaging the Rails
NOTE Once engaged, the lock features must be released to remove the system from the rack. To
release the lock features, depress the two latches with the blue arrows (one on either side)
downward. While depressing the lock features and supporting the system weight, pull the
system out. Pressure can be released once the lock features disengage from the outer rail.
Figure 1-16. Releasing the Rails
To Next Page
Loading...
