Insert the Battery and SD/SDHC Card (Not included)
1. Open the battery compartment.
2.
Insert the enclosed batteries into the battery
slot in the correct direction.
3. Insert an SD/SDHC card (not included) into the
memory card slot as shown.
4. Close the battery compartment.
Optional SD/SDHC cards are not included. The use of 64MB to16 GB memory cards from recognized
manufacturers such as SanDisk, Panasonic and HP is recommended for reliable data storage.
To remove the SD/SDHC card, open the battery compartment and gently push the card to release it. Pull
the card out carefully.
To Next Page
Loading...
Need help?
General
