HP cc330 - FILE AND SOFTWARE MANAGEMENT; Memory Formatting and File Numbering; File Transfer and System Reset

3332
3332
Startup Screen:
Use Up/Down button to select the Startup Screen option, press to
conrm or press Left button to return to last page, and press to
exit the menu.
User
GE logo
Set back to defaults:
Use Up/Down button to select Set back to defaults, press to
conrm or press Left button to return to last page, and press to
exit the menu.
Yes
No
Setup Menu
The Setup menu for the camera is available in all modes. Each menu page can be selected by pressing the
button and switching between menus with the Left/Right button.
To adjust the settings:
1. Select the menu page with the function you want to adjust and
press the Down button.
2. Switch between different functions with the
Up/Down button.
3. Press the
Right button to enter the submenu.
After selecting a function option, you can press the Up button to return to the menu for other Camera
Setup pages. Or you can press the Down button to switch to the next menu page.
Refer to the following pages for more details about each setting.
Beep
Use this setting to adjust the volume of beep when buttons are
pressed and change the tones for Shutter button, self-timer, and
power-on/power-off.
To change this setting:
1. Select the
Beep setting from the Setup menu as described previously.
2. Use the
Up/Down navigation buttons to switch between volume, shutter, key, self-timer, and power elds.
3. Press the Right button, press the Up/Down button to adjust volume and change tone, and press the
button to conrm setting.