Media that can damage the printer
Do not use media that can damage the printer.
●
Do not use media with staples attached.
●
Do not use transparencies, labels, photo, or glossy paper designed for inkjet printers or other
low temperature printers. Use only media that is specified for use with HP Color LaserJet
printers.
●
Do not use paper that is embossed or coated and is not designed for the temperatures of the
fuser.
●
Do not use letterhead paper with low temperature dyes or thermography. Preprinted forms or
letterhead must use inks that are designed for the temperatures of heat of the fuser.
●
Do not use any media that produces hazardous emissions, or that melts, offsets, or discolors
when exposed to the temperature of the fuser.
●
Do not print on the back side of media that is designed to be printed on one side only.
To order HP LaserJet printing supplies, go to
http://www.hp.com/go/ljsupplies/ in the U.S. or to
http://www.hp.com/ghp/buyonline.html/ worldwide.
Media to avoid
Media outside the printer specifications will cause a loss of print quality and increase the occurrence
of jams.
●
Do not use paper that is too rough. Use paper less than 250 Sheffield smoothness tested.
●
Do not use paper with cutouts or perforations other than standard 3-hole punched paper.
●
Do not use multi-part or multi-page forms.
●
To ensure even color, do not use paper with a watermark if printing solid patterns.
ENWW Media specifications 11
To Next Page
Loading...