Table A-3 Electrical specifications
Item 110-Volt models 220-Volt models
Power requirements
1
110-127V (+/-10%)
50/60 Hz (+/- 2 Hz)
220-240V (+/-10%)
50/60 Hz (+/- 2 Hz)
Rated current 4.0 Amps 2.5 Amps
Table A-4 Power consumption (average, in watts)
1
Product model
Printing (Color)
2
Printing (Black and
White)
2
Copying
2
Ready
2
PowerSave Off
HP Color
LaserJet
CM1015 MFP
200 W 190 W 150 W 18 W 18 W 0 W
HP Color
LaserJet
CM1017 MFP
200 W 190 W 150 W 18 W 18 W 0 W
1
Values subject to change, see http://www.hp.com/support/cljCM1015_1017 for current information.
2
Power reported is highest values measured for color and monochrome printing/copying using all standard voltages.
3
Default time from Ready Mode to Power Save = 0 minutes.
4
Recovery time from Power Save to start of printing = 14 seconds
5
Maximum heat dissipation for all models in Ready Mode = 62 BTU/Hour
6
HP Color LaserJet CM1015 MFP and HP Color LaserJet CM1017 MFP speed is 8 PPM Letter and A4 size.
WARNING! Power requirements are based on the country/region where the MFP is sold. Do
not convert operating voltages. This can damage the MFP and void the product warranty.
Table A-5 Environmental specifications
Recommended
1
Operating
1
Storage
1
(MFP and print cartridge)
Temperature
20° to 27°C (68° to 81°F) 15° to 32.5°C (59° to 90.5°F) -20° to 40°C (-4° to 104°F)
Relative humidity 20% to 70% 10% to 80% 95% or less
1
Values are subject to change. See http://www.hp.com.support/cljCM1015_1017 for current information.
Table A-6 Acoustic emissions
1
Sound Power Level
Declared Per ISO 9296
1
Printing/Copying (8 PPM)
2
Ready
L
WAd
= 5.8 Bels (A) [58 dB (A)]
Inaudible
Sound Pressure Level (SPL)-Bystander Position
Declared Per ISO 9296
1
ENWW Multifunction peripheral (MFP) specifications 207
To Next Page
Loading...