Because the printer is already configured for the existing network, confirm that you want to change the
settings. Click Next to continue. The Change TCP/IP Settings dialog box appears.
Figure 3-41 Network Install – Change TCP/IP Settings dialog box
Make the network changes and then click Next to continue. The Confirm Settings dialog box appears
(see
Figure 3-39 Network install – Confirm Settings dialog box).
Click Next to continue. The Congratulations! Software installation complete dialog box appears.
Figure 3-42 Network install – Congratulations! Software installation complete dialog box
158 Chapter 3 Install Microsoft Windows printing-system components ENWW
Microsoft Windows
install
To Next Page
Loading...