EasyManua.ls Logo

HP Color LaserJet CM3530 MFP Series User Manual

HP Color LaserJet CM3530 MFP Series
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HP Color LaserJet CM3530 MFP Series – Manage and maintain
Load paper and print media
How do I? Steps to perform
1 Open Tray 1.
Load Tray 1
CAUTION: To avoid jams, never add or remove paper
from Tray 1 during printing.
2 Fold out the tray extension to support the paper and
set the side guides to the correct width.
3 Load paper in the tray face down and the short, top
edge going into the product first.
4 Make sure the stack fits under the tabs on the guides
and does not exceed the load-level indicators.
1
© 2008 Copyright Hewlett-Packard
Development Company, L.P.
www.hp.com

Other manuals for HP Color LaserJet CM3530 MFP Series

Question and Answer IconNeed help?

Do you have a question about the HP Color LaserJet CM3530 MFP Series and is the answer not in the manual?

HP Color LaserJet CM3530 MFP Series Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, copy, scan, fax
Print Speed BlackUp to 31 ppm
Print Speed ColorUp to 31 ppm
Print ResolutionUp to 1200 x 600 dpi
Copy Speed BlackUp to 31 cpm
Copy Speed ColorUp to 31 cpm
Copy ResolutionUp to 600 x 600 dpi
Fax ResolutionUp to 300 x 300 dpi
Fax Speed33.6 kbps
Monthly Duty CycleUp to 75, 000 pages
Processor Speed515 MHz
Duplex PrintingAutomatic (standard)
Paper Handling Output250-sheet output bin
Scanner TypeFlatbed, ADF
Recommended Monthly Page Volume1, 500 to 5, 000 pages
Memory512 MB
Hard Disk80 GB
Connectivity1 Hi-Speed USB 2.0
Paper Handling Input100-sheet multipurpose tray
Media Sizes SupportedLetter, legal, executive, 8.5 x 13 in, envelopes
Media TypesPaper (bond, color, letterhead, plain, preprinted, prepunched, recycled, rough), transparencies, labels, envelopes
DisplayColor
Operating System CompatibilityWindows, Mac OS, Linux
Scan ResolutionUp to 600 x 600 dpi

Summary

Load paper and print media

Load Tray 1

Instructions for loading paper into Tray 1.

Load Tray 2

Load Tray 1 (continued)

Continuation of loading paper into Tray 1.

Load Tray 2

Instructions for loading paper into Tray 2.

Load standard-sized paper into Tray 3

Load Tray 2 (continued)

Continuation of loading paper into Tray 2.

Load standard-sized paper into Tray 3

Steps to load standard paper into Tray 3.

Change print cartridges

Change print cartridges

Steps to replace the printer's print cartridges.

Replace the toner collection unit

Replace the toner collection unit

Procedure for replacing the toner collection unit.

Replace staples

Load staples

Instructions for loading staples into the stapler.

Clean the paper path from the product control panel

Create and use the cleaning page

Using the control panel to run a cleaning page.

Clear jams

Clear jams in the right door

Steps to clear paper jams from the right door.

Clear jams in the output bin area

How to clear paper jams from the output bin.

Clear jams in Tray 1

Steps to clear paper jams from Tray 1.

Clear jams in Tray 2

Instructions for clearing paper jams from Tray 2.

Clear jams in the lower right door (Tray 3)

Clearing jams from the lower right door (Tray 3).

Related product manuals