HP Color LaserJet CM3530 MFP Series - Load standard-sized paper into Tray 3; Load Tray 2 (continued)

HP Color LaserJet CM3530 MFP Series – Manage and maintain
How do I? Steps to perform
Load Tray 2 (continued)
9 Slide the tray into the product.
10 The control panel shows the tray’s paper type and
size. If the configuration is not correct, follow the
instructions on the control panel to change the size or
type.
HP LaserJet
DDMMYYYY 00.00 AM
Load standard-sized paper into Tray 3
1 Slide open the tray.
NOTE: Do not open the tray while it is in use.
2 Adjust the paper-length and paper-width guides by
squeezing the adjustment latches and sliding the
guides to the size of the paper being used.
3
© 2008 Copyright Hewlett-Packard
www.hp.com
Development Company, L.P.