HP Color LaserJet CM3530 MFP Series - Page 4

HP Color LaserJet CM3530 MFP Series – Manage and maintain
How do I? Steps to perform
3 Load paper into the tray face up. Check the paper to
verify the guides lightly touch the stack, but do not
Load standard-sized paper into Tray 3
bend it.
(continued)
NOTE: To prevent jams, do not overfill the tray. Be
sure the top of the stack is below the tray full
indicator.
NOTE: If the tray is not adjusted correctly, an error
message might appear during printing or the paper
might jam.
4 Slide the tray into the product.
5 The control panel shows the tray’s paper type and
size. If the configuration is not correct, follow the
HP LaserJet
instructions on the control panel to change the size or
type.
DDMMYYYY 00.00 AM
4
© 2008 Copyright Hewlett-Packard
www.hp.com
Development Company, L.P.