Scan Setup Wizard
The Scan Setup Wizard allows users to scan documents from the HP Color LaserJet CM3530 MFP
Series and store them in a folder on a server or network computer. Then users who have proper
credentials to access the network folder can retrieve the documents, save the documents to their
computers, and print them.
Before the Scan Setup Wizard can be used, Send to Folder must be enabled on the HP EWS. To do
this, click on the HP EWS Digital Sending tab and select Send to Folder. On the Send to Folder
screen, click the check boxes next to Enable Send to Folder and Enable Scan Setup Wizard. For
more details on using the HP EWS, see the HP Color LaserJet CM3530 MFP Embedded Web Server
User Guide.
If Enable Send to Folder and Enable Scan Setup Wizard are not enabled in the HP EWS, an error
message pop-up will be displayed during the Search for Device step.
NOTE: The HP Color LaserJet CM3530 MFP Series must be connected via the network to use the
Scan Setup Wizard.
Figure 2-6 Scan Setup Wizard–Complete screen
56 Chapter 2 Software description ENWW
To Next Page
Loading...
