Print information pages
Information pages provide details about the product and its current configuration. The following table
provides the instructions for printing the information pages.
Page description How to print the page from the product control panel
Administration Menu Map
Shows the control-panel menus and
available settings.
1. At the product control panel, touch the down arrow until the Administration menu
displays.
2. Touch the Administration menu to open it.
3. Touch the Information menu to open it.
4. Touch the Configuration/Status Pages menu to open it.
5. Touch the Administration Menu Map option, and then touch the Print button.
The content of the menu map varies, depending on the options currently installed in
the product.
For a complete list of control panel menus and possible values, see
Control panel
on page 11.
Configuration Page
Shows product settings and installed
accessories.
1. At the product control panel, touch the down arrow until the Administration menu
displays.
2. Touch the Administration menu to open it.
3. Touch the Information menu to open it.
4. Touch the Configuration/Status Pages menu to open it.
5. Touch the Configuration Page option, and then touch the Print button.
NOTE: If the product contains an HP Jetdirect print server or an optional hard disk
drive, additional configuration pages print that provide information about those
devices.
Supplies Status Page
Shows print-cartridge toner levels.
1. At the product control panel, touch the down arrow until the Administration menu
displays.
2. Touch the Administration menu to open it.
3. Touch the Information menu to open it.
4. Touch the Configuration/Status Pages menu to open it.
5. Touch the Supplies Status Page option, and then touch the Print button.
NOTE: If you are using non-HP supplies, the supplies status page might not show
the remaining life for those supplies.
Usage Page
Shows a page count for each size of
paper printed, the number of one-sided
(simplexed) or two-sided (duplexed)
pages, and the average percentage of
coverage.
1. At the product control panel, touch the down arrow until the Administration menu
displays.
2. Touch the Administration menu to open it.
3. Touch the Information menu to open it.
4. Touch the Configuration/Status Pages menu to open it.
5. Touch the Usage Page option, and then touch the Print button.
80 Chapter 4 Manage and maintain ENWW
To Next Page
Loading...
