Low-voltage power supply
The low-voltage power-supply circuit converts the AC power from the wall receptacle into the DC voltage
that the product components use. The product has two low-voltage power-supplies for 110 Volt or 220
Volt input.
Figure 5-5 Low-voltage power-supply circuit
Fuser control
circuit
The low-voltage power supply converts the AC power into three DC voltages, which it then subdivides,
as described in the following table.
Table 5-8 Converted DC voltages
Main DC voltage Sub-voltage Behavior
+24 V +24VA Constantly supplied
ENWW Engine-control system 125
To Next Page
Loading...
