HP CM3530 - Color LaserJet MFP Laser - Page 168

Step 7: Separation
The stiffness of the paper causes it to separate from the ITB as the ITB bends. The static-charge
eliminator removes excess charge from the paper to ensure that the toner fuses correctly.
Figure 5-17 Separation
Step 8: Fusing
To create the permanent image, the paper passes through heated, pressurized rollers to melt the toner
onto the page.
Figure 5-18 Fusing
Fuser sleeve
Fuser heater
138 Chapter 5 Theory of operation ENWW