Duplexing unit
The duplexing unit reverses the paper and feeds it through the paper path to print the second side. The
duplexing unit consists of the following components:
●
Duplexing-reverse unit: Installed on top of the product
●
Duplexing-feed unit: Along the right side
The DC controller controls the operational sequence of the duplex block. The DC controller drives each
load, such as motors, solenoid, and clutch, depending on the duplex reverse unit and duplex feed unit
controls.
Figure 5-42 Duplexing unit
162 Chapter 5 Theory of operation ENWW
To Next Page
Loading...
