Optional paper feeder assembly (Tray 3)
NOTE: For information about removing the Tray 3 pickup roller, see Pickup and feed rollers (Tray 3)
on page 203.
For information about removing the Tray 3 cassette, see
Tray cassette on page 199.
For information about removing the right door (optional paper feeder), see
Right door (optional paper
feeder) on page 221
Drawer connector
1. With a small screwdriver, lift one tab and then slide the drawer connector to release.
2. Remove one connector (callout 1).
Figure 6-298 Remove the drawer connector; optional paper feeder
1
368 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...
