b. Open the jam-access door. If paper is jammed inside the fuser, gently pull it straight up to
remove it. If the paper tears, remove all paper fragments.
CAUTION: Even if the body of the fuser has cooled, the rollers that are inside could still be
hot. Do not touch the fuser rollers until they have cooled.
1
2
1 Open the jam-access door.
2 Remove the jammed paper.
c. Close the jam-access door, and push the fuser completely into the product.
10. Close the right door.
478 Chapter 7 Solve problems ENWW
To Next Page
Loading...
