4. Close the document feeder cover.
Jam recovery
This product provides jam recovery, a feature that reprints jammed pages. The following options are
available:
●
Auto setting — The product attempts to reprint jammed pages when sufficient memory is available.
●
Off setting — The product does not attempt to reprint jammed pages. Because no memory is used
to store the most recent pages, performance is optimal.
NOTE: When using this option, if the product runs out of paper and the job is being printed on
both sides, some pages can be lost.
●
On setting — The product always reprints jammed pages. Additional memory is allocated to store
the last few pages printed. This might cause overall performance to suffer.
Set the jam recovery feature
1. Touch the Administration menu and then touch the Device Behavior setting.
2. Touch the Warning/Error Behavior setting and then touch the Jam Recovery setting.
3. Touch an option and then touch the Save button.
486 Chapter 7 Solve problems ENWW
To Next Page
Loading...
