Menu item Sub-menu item Sub-menu item Values Description
Tray Behavior Use Requested Tray Exclusively (default)
First
Control how the product handles jobs that
have specified a specific input tray.
Manually Feed
Prompt
Always (default)
Unless Loaded
Specify how a prompt should appear when
the type or size for a job does not match the
specified tray and the product pulls from the
multipurpose tray instead.
PS Defer Media Enabled (default)
Disabled
Select either the PostScript (PS) or HP
paper-handling model.
Use Another Tray Enabled (default)
Disabled
Turn on or off the control-panel prompt to
select another tray when the specified tray is
empty.
Alternative
Letterhead Mode
On
Off (default)
Use this feature so that you can load
letterhead or preprinted paper into the tray
the same way for all print or copy jobs,
whether you are printing or copying to one
side of the sheet or to both sides of the sheet.
Size/Type Prompt Display (default)
Do not display
Control whether the tray configuration
message appears whenever a tray is opened
or closed.
Duplex Blank Pages Auto (default)
Yes
Control how the product handles two-sided
jobs (duplexing).
General Copy
Behavior
Hold off print job On
Off
Prevents print jobs from beginning to print
while a walk-up user is setting up a job.
Hold off time Prevents non-copy print jobs from starting for
a specified time after a copy job is completely
printed.
Scan Ahead Enabled (default)
Disabled
Turn on no-wait scanning. With Scan Ahead
enabled, the pages in the original document
are scanned to disk and held until the product
becomes available.
Auto Print Interrupt Enabled
Disabled (default)
When this feature is enabled, copy jobs can
interrupt print jobs that are set to print multiple
copies.
The copy job is inserted into the print queue
at the end of one copy of the print job. After
the copy job is complete, the product
continues printing the remaining copies of the
print job.
Copy Interrupt Enabled
Disabled (default)
When this feature is enabled, a copy job that
is currently printing can be interrupted when
a new copy job is started. You are prompted
to confirm that you want to interrupt the
current job.
Alternative
Letterhead Mode
Off (default)
On
This option allows loading of letterhead or
preprinted paper the same way for all copy
jobs, whether copying to one side of the
paper or to both sides of the paper.
Table 2-15 Device Behavior menu (continued)
ENWW Device Behavior menu 43
To Next Page
Loading...
