HP CM4730 MFP

Menu item Sub-menu item Sub-menu item Values Description
General Printing
Behavior
Override A4/Letter No
Yes (default)
When this feature is enabled, the job prints on
letter-size paper when an A4 job is sent but
no A4-size paper is loaded in the device (or
prints on A4 paper when a letter-size job is
sent but no letter-size paper is loaded). This
option also overrides A3 with ledger-size
paper and ledger with A3-size paper.
Manual Feed Enabled
Disabled (default)
When this feature is enabled, the user can
select manual feed from the control panel as
the paper source for a job.
Courier Font Regular (default)
Dark
Select which version of the Courier font you
want to use.
Wide A4 Enabled
Disabled (default)
Change the printable area of A4-size paper.
If you enable this option, eighty 10-pitch
characters can be printed on a single line of
A4 paper.
Print PS Errors Enabled
Disabled (default)
Select whether a PostScript (PS) error page
is printed when the device encounters a PS
error.
Print PDF Errors Enabled
Disabled (default)
Select whether a PDF error page is printed
when the device encounters a PDF error.
Personality Auto (default)
PCL
PDF
PS
Select the printer language that the device
should use.
Normally, you should not change the
language. If you change the setting to a
specific language, the device does not
automatically switch from one language to
another unless specific software commands
are sent to the device.
Table 2-15 Device Behavior menu (continued)
46 Chapter 2 Control panel ENWW