Detailed Microsoft Windows installation instructions
Install the printer driver using the HP Driver Installation Utility (HPDIU)
A series of dialog boxes appear during installation of the HP Color LaserJet CM6030 and CM6040 MFP
Series printing-system software in Windows environments.
NOTE: You can return to the previous dialog box by clicking the Back button, or exit the HP Color
LaserJet CM6030 and CM6040 MFP Series printing-system software installation by clicking the
Cancel button.
1. Close all programs.
2. Insert the HP Color LaserJet CM6030 or HP Color LaserJet CM6040 software CD into the CD-
ROM drive. The software installer detects the language of the operating system, and then display
the main menu of the CD Browser program in the same language.
If the installer program has not started after 30 seconds, complete these steps:
a. On the Start menu, click the Run option.
b. Type the following: X:\SETUP.EXE (where X is the letter of the CD-ROM drive).
c. Click the OK button.
80 Chapter 3 Install Windows printing-system components ENWW
To Next Page
Loading...
