EasyManua.ls Logo

HP CM6040f - Color LaserJet MFP Laser - Page 99

HP CM6040f - Color LaserJet MFP Laser
326 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Install Windows software for networks
NOTE: For detailed installation instructions, see Detailed Microsoft Windows installation instructions
on page 80.
The software on the HP Color LaserJet CM6030 and CM6040 MFP Series CD-ROM supports network
installation with a Microsoft network. For network installation on other operating systems, go to
www.hp.com/support/cljcm6030mfp or www.hp.com/support/cljcm6040mfp.
The installer does not support product installation or object creation on Novell servers. It supports only
direct-mode network installations between Windows computers and a product. To install the product
and create objects on a Novell server, use an HP utility (such as HP Web Jetadmin) or a Novell utility
(such as NWAdmin).
1. Make sure that you have administrator privileges.
2. Make sure that the HP Jetdirect print server and product are correctly connected to the network.
Print a configuration page, and find the HP Jetdirect page.
To print a configuration page from the product control panel, perform the following:
a. Touch Administration.
b. Touch Information.
c. Touch Configuration/Status Pages.
d. Touch Configuration Page.
e. Touch Print.
On the HPJetdirect page, locate the IP address that is currently configured. You might need this
address to initially identify the product on your network and complete the installation.
3. Close all programs.
4. Insert the HP Color LaserJet CM6030 or HP Color LaserJet CM6040 software CD into the CD-
ROM drive. The installer program should open.
If the installer program has not started after 30 seconds, complete these steps:
a. On the Start menu, click the Run option.
b. Type the following: X:\SETUP.EXE (where X is the letter of the CD-ROM drive).
c. Click the OK button.
5. When prompted, click the Install button. The printer driver screen appears.
6. Select the driver that you want to install and follow the instructions on the computer screen.
7. After the installation is complete, you might need to restart the computer.
8. Print a test page from any software program to make sure that the software is correctly installed.
ENWW Microsoft Windows general installation overview 79
Installing Windows
printing-system
com
p
onents

Other manuals for HP CM6040f - Color LaserJet MFP Laser

Related product manuals