5. Select the Local printer attached to this computer option, and then click the Next > button.
NOTE: The printer name is HP MFP Send Fax when the driver is installed on a local printer.
Select the Local printer attached to this computer option to install the HP Easy Printer Care on
a network printer.
If the printer port does not appear in the Use the following port drop-down list, see
Create a new
TCP/IP port for a direct connection on page 96.
If you select the A network printer, or a printer attached to another computer option (Point and
Print installation), then the IP address of the computer is required. Some features, such as fax
preview, are not available if the driver is installed by using the network printer installation. For
detailed installation instructions, see
Print sever connection on page 99.
The HP Send Fax Driver cannot be installed on a printer that is connected to the computer via a
USB, serial, or parallel port. It must be on a network.
Figure 3-38 Send Fax Driver Installation — Local or Network Printer screen
112 Chapter 3 Install Windows printing-system components ENWW
To Next Page
Loading...
