6. Select the product name, print path, or IP address of the product from the Use the following
port drop-down list, and then click the Next button.
NOTE: If the product name, print path, or IP address of the product is not listed, see Create a
new TCP/IP port for a direct connection on page 96. If the product is connected via the network
using a print server, see
Print sever connection on page 99.
Figure 3-39 Send Fax Driver Installation — Use the following port screen
ENWW Use the MFP Send Fax Driver 113
Installing Windows
printing-system
com
To Next Page
Loading...
