Tray Dimensions Minimum Maximum
Tray 4 (500-sheet) Width 148.0 mm (5.83 inches) 320.0 mm (12.6 inches)
Height 210.0 mm (8.26 inches) 457.2 mm (18.0 inches)
Tray 5 Width 148.0 mm (5.83 inches) 320.0 mm (12.6 inches)
Height 210.0 mm (8.26 inches) 457.2 mm (18.0 inches)
Duplexer Width 184.0 mm (7.24 inches) 320.0 mm (12.6 inches)
Height 210.0 mm (8.27 inches) 457.2 mm (18.0 inches)
Paper source
The Paper source setting specifies the source tray to use for printing a document. The list of source
trays depends on the product accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
The Paper source drop-down menu can contain the following options, depending on what has been
installed on the product:
●
Automatically select
●
Printer Auto Select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
●
Tray 2 (500-sheet tray)
●
Tray 3 (500-sheet tray)
●
Tray 4 (500-sheet tray, HP Color LaserJet CM6040f only)
●
Tray 5 (500-sheet tray, HP Color LaserJet CM6040f only)
The default setting is Automatically Select. When this setting is selected, the HP Color LaserJet
CM6030 and CM6040 MFP Series uses the source tray that supports the paper size that you have
selected. If you select a source tray other than Automatically select, make sure that the correct paper
size is loaded in the source tray. For information about paper sources, see the Engineering Details
chapter of this STR.
Paper type
The Paper type drop-down menu shows the first few paper types that the HP Color LaserJet CM6030
and CM6040 MFP Series supports:
●
Unspecified
●
Plain
●
Light 60 - 74
●
Intermediate 85 - 95
●
Bond
Table 4-1 PCL 6 custom paper sizes (continued)
158 Chapter 4 HP PCL 6 Print Driver for Windows ENWW
To Next Page
Loading...
