●
Recycled
●
Mid-weight Glossy 96 - 110
●
Mid-weight 96 - 110
●
Heavy 111 - 130
●
Heavy Glossy 111 - 130
●
Extra Heavy 131 - 175
●
Extra Heavy Glossy 131 - 175
●
Cardstock 176 - 220
●
Card Glossy 176 - 220
●
Color Laser Transparency
●
Labels
●
Letterhead
●
Envelope
●
Preprinted
●
Prepunched
●
Colored
●
Rough
●
HP Tough Paper
When you use the default setting, Unspecified, the product uses the default paper type, which is usually
Plain.
No mechanism exists for manually adding custom paper types through the driver. Custom types can be
added only by using the bidirectional communication mechanism, so they must already exist in the
product when the bidirectional query occurs. If bidirectional communication is enabled, then the
information on an updated list of paper types is returned. If bidirectional communication is not enabled,
then the driver looks for custom paper types that have been saved from a previous bidirectional
communication query, and uses those. Otherwise, no custom paper types are available through the
driver.
The default setting is Unspecified, and the program selects the paper type. If you select a different
setting, make sure that the correct paper type is loaded in the tray that you selected in the Paper
source setting. For more information about paper types, see the Engineering Details chapter of this
STR.
When you change the print-driver setting to a paper type that is not currently loaded in the product, a
control-panel message appears that prompts you to load the paper type or select another tray.
Special pages
To specify special pages to be used, click the Settings button under Special Pages.
ENWW Paper/Quality tab features 159
HP PCL 6 Print Driver for
Windows
To Next Page
Loading...
