HP CM6040f - Color LaserJet MFP Laser - Page 307

Size Dimensions Stacking
2
Angled
staple (left-
angled)
Angled
staple (right-
angled)
Two staples
(top or side)
Folding Saddle stitch
(3.9 x 5.5 in to 12.6 x
18 in)
1
Booklet maker only
2
Stacking uses bins 1, 2, and 3 in the stapler/stacker, or bins 1 and 2 in the booklet maker.
Supported paper and print media types
Table 6-14 Tray 1 paper information
Type Specifications Quantity Driver settings Paper orientation
Paper and cardstock,
standard sizes
Range:
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Equivalent to 100
sheets of 75 g/m
2
(20
lb) bond.
Plain or unspecified Load preprinted or
prepunched paper
facing down, with the
top edge leading into
the tray, or toward the
back of the product
Envelopes
Less than 60 g/m
2
(16
lb) bond to 90 g/m
2
(24
lb) bond
Up to 10 envelopes Envelope Short edge leading,
flap toward the front of
the product, facing up
Labels Maximum 0.23 mm
(0.009 in) thick
Maximum stack height:
10 mm (0.6 in)
Labels Side to be printed on
facing down
Transparencies Minimum 0.13 mm
(0.005 in) thick
Maximum stack height:
10 mm (0.6 in)
Transparencies Side to be printed on
facing down
Heavy 0.13 mm (0.005 in)
thick
Maximum stack height:
10 mm (0.6 in)
Light glossy, glossy, or
heavy glossy
Side to be printed on
facing down
Glossy Range:
75 g/m
2
(20 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Light glossy, glossy, or
heavy glossy
Side to be printed on
facing down
Photo media
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Side to be printed on
facing down
Cut sheet paper
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Side to be printed on
facing down
Tough paper
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Side to be printed on
facing down
Table 6-15 Trays 2, 3, 4, and 5 paper information
Type Specifications Quantity Settings Paper orientation
Paper and cardstock,
standard sizes
Range:
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
500 sheets of 75 g/m
2
(20 lb) bond.
Plain or unspecified Load preprinted or
prepunched paper
facing up, with the top
toward the back of the
tray or toward the right-
hand side of the tray.
Labels Maximum 0.13 mm
(0.005 in) thick
Maximum stack height:
54 mm (2.1 in)
Labels Side to be printed on
facing up
Table 6-13 Supported paper and print media sizes for the optional HP 3-bin Stapler/Stacker and HP Booklet Maker/
Finisher accessories (continued)
ENWW Media attributes 287
Engineering details