Type Specifications Quantity Settings Paper orientation
Transparencies Minimum 0.13 mm
(0.005 in) thick
Maximum stack height:
54 mm (2.1 in)
Transparencies Side to be printed on
facing up
Heavy 0.13 mm (0.005 in) thick Maximum stack height:
54 mm (2.1 in)
Light glossy, glossy, or
heavy glossy
Side to be printed on
facing up
Glossy
75 g/m
2
(20 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
54 mm (2.1 in)
Light glossy, glossy, or
heavy glossy
Side to be printed on
facing up
Photo media
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
54 mm (2.1 in)
Light glossy, glossy, or
heavy glossy
Side to be printed on
facing up
Cut sheet paper
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
54 mm (2.1 in)
Plain or unspecified Side to be printed on
facing up
Tough paper
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
54 mm (2.1 in)
HP Tough Paper Side to be printed on
facing up
Trays 2, 3, 4, and 5 capacity: 54 mm (2.126 in) height or 500 sheets of paper, whichever is less.
Supported media types include: Cut sheet paper, labels, OHT, glossy paper, glossy film, photo media,
and tough paper. Basis Weight: 60-220 g/m
2
(16-58 lb).
Duplex printing: Provides automatic two-sided printing (printing on both sides of the paper). The paper
size range for automatic duplex printing is 175 to 320 mm (7.2 to 12.6 in) x 210 to 457 mm (8.3 to 18
in). The media weight range is 60 to 220 g/m
2
(16 to 58 lb)
NOTE: HP Color Laser Presentation Paper, Glossy (Q2546A) is not supported with this product. Using
this type of paper can cause a fuser jam that might require the replacement of the fuser. Two
recommended alternatives are HP Color LaserJet Presentation Paper, Soft Gloss (Q6541A), and HP
Color LaserJet Brochure Paper, Glossy (Q6611A, Q6610A).
NOTE: For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/
sbso/product/supplies.
Special paper or print media guidelines
This product supports printing on special media. Use the following guidelines to obtain satisfactory
results. When using special paper or print media, be sure to set the type and size in your print driver to
obtain the best print results.
CAUTION: HP LaserJet printers use fusers to bond dry toner particles to the paper in very precise
dots. HP laser paper is designed to withstand this extreme heat. Using inkjet paper not designed for this
technology could damage your printer.
Media type Do Do not
Envelopes
●
Store envelopes flat.
●
Use envelopes where the seam
extends all the way to the corner of
the envelope.
●
Use peel-off adhesive strips that
are approved for use in laser
printers.
●
Do not use envelopes that are
wrinkled, nicked, stuck together, or
otherwise damaged.
●
Do not use envelopes that have
clasps, snaps, windows, or coated
linings.
●
Do not use self-stick adhesives or
other synthetic materials.
Table 6-15 Trays 2, 3, 4, and 5 paper information (continued)
288 Chapter 6 Engineering details ENWW
To Next Page
Loading...
