60 Installation and configuration C7085-90921
Parallel cable pin configuration
To take advantage of the enhanced bidirectional parallel interface, use a 10-meter (30 ft.) parallel
cable (IEEE-1284 compliant) with a 25-pin DB male to a (IEEE-1284C) male “C” connector. Use
the following table to verify correct pin configuration.
Signal Name Printer Pin #
Computer
Port #
nSTROBE 15 1
DATA 0 6 2
DATA 1 7 3
DATA 2 8 4
DATA 3 9 5
DATA 4 10 6
DATA 5 11 7
DATA 6 12 8
DATA 7 13 9
nACKNLG 3 10
BUSY 1 11
CALL (PE) 5 12
SELECT 2 13
NAutoFd 17 14
O VDC (GND) 19 – 35 18 – 25
nFAULT 4 15
nSe/In 16 17
nINIT 14 16
PERIPHLH 36
N.C. 18
To Next Page
Loading...