22 Chapter 1 Troubleshooting control panel messages EN
SELECT LANGUAGE
The language selection power-up key sequence has been entered.
The printer will prompt the user to select a new control panel display
language once it has completed its initialization process.
l Select a new language when prompted.
SERVICE MODE
The Service Mode power-up key sequence has been entered. The
printer will remain in Service Mode until [Go] is pressed.
l Press [Go] to end service mode.
TONER CMYK LOW
The toner cartridge specified is low on toner. This message appears if
TONER=LOW (default) is set on the printer control panel in the
Configuration Menu.
l Printing will continue until a TONER OUT message appears. To
change the toner cartridge now, press [Select].
TONER CMYK OUT
alternates with
PRESS SELECT TO CHANGE TONER
The toner cartridge specified is out of toner.
l Press [Select] to enter the toner replacement mode. Press [Go] to
resume printing without changing the cartridge.
TONER CMYK LOW
alternates with
PRESS SELECT TO CHANGE TONER
The toner cartridge specified is low on toner and must be replaced.
This message appears when
TONER LOW = STOP is set on the front
panel in the Configuration Menu.
l Press [Select] to enter the toner replacement menu.
www.GovTechMedia.com
To Next Page
Loading...